LG HE Washer UL Error (Unbalanced Load) – How to Redistribute Clothes

Is your LG HE washer showing a UL error (Unbalanced Load) and stopping mid-cycle? Don’t panic! This common issue occurs when the laundry inside the drum isn’t evenly distributed, causing the washer to detect an imbalance. Fortunately, fixing it is simple with the right troubleshooting steps.
In this comprehensive guide, we’ll walk you through 10 proven methods to redistribute clothes and resolve the UL error efficiently. Whether you’re dealing with bulky bedding or a small load, these solutions will help restore smooth operation to your LG washer.
Let’s dive in and get your laundry back on track!
Also read: Whirlpool HE Washer Suds Error – Detergent Overuse Solutions
Understanding the LG HE Washer UL Error
The UL error in LG HE washers stands for “Unbalanced Load,” meaning the washer detects uneven weight distribution inside the drum. This triggers a safety mechanism to prevent excessive vibration, noise, or potential damage.
Why Does It Happen?
- Heavy items (like towels or jeans) clumped together.
- Overloading or underloading the washer.
- Uneven spinning due to bulky items.
How the LG HE Washer Detects It
LG washers use sensors to monitor drum balance. If the load shifts too much, the washer pauses and displays UL to prevent motor strain.
Quick Fix: Stop the cycle, redistribute clothes evenly, and restart.
For stubborn errors, follow the next steps!

Stop and Restart the LG HE Washer
Before diving deep, try this simple reset:
- Pause the cycle (press Pause/Stop).
- Open the door and redistribute clothes manually.
- Close the door and press Start again.
Why This Works
- Resets the washer’s internal sensors.
- Gives you a chance to adjust the load.
Pro Tip: If the error persists, unplug the washer for 1 minute to reset the control board.
This quick fix resolves minor imbalances in most cases.
Redistribute Clothes Evenly in LG HE Washer
The most effective solution for UL errors is manual redistribution.
Step-by-Step Guide:
- Pause the cycle and open the door.
- Spread heavy items (towels, jeans) around the drum.
- Mix large and small items for better balance.
- Avoid stacking clothes on one side.
What Not to Do:
- Don’t overload the drum.
- Don’t wash only bulky items alone.
Result: A balanced load ensures smooth spinning.

Adjust the Load Size in LG HE Washer
Overloading or underloading triggers UL errors.
Ideal Load Size:
- Large loads: Fill drum ¾ full (not packed tightly).
- Small loads: Add a few extra items to balance weight.
LG’s Recommendation: Follow the manufacturer’s load capacity guidelines (check the manual).
Pro Tip: If washing bulky items (comforters, blankets), add 2-3 towels to balance the drum.
Use the Right Detergent & Settings of LG HE Washer
Excess suds can cause imbalance by making clothes stick together.
How to Prevent It:
Use HE (High-Efficiency) detergent (less suds).
Avoid over-pouring detergent.
Select the correct cycle (e.g., Bulky Items for heavy loads).
LG’s Advice: Use less detergent for smaller loads.
Check for LG HE Washer Leveling
An unlevel washer worsens imbalance issues.
How to Check & Fix:
- Place a level tool on top of the washer.
- Adjust the leveling feet (turn clockwise to raise, counterclockwise to lower).
- Ensure all four feet are firmly on the ground.
Why It Matters:
- A tilted washer increases vibrations, triggering UL errors.
- Proper leveling ensures smooth spinning.
Pro Tip: Use a rubber mat underneath to reduce movement.
Avoid Washing Bulky Items Alone in LG HE Washer
Washing single heavy items (like blankets or rugs) can cause imbalance.
Best Practices:
Wash bulky items with smaller, lighter clothes for balance.
Use the “Bulky Items” or “Bedding” cycle (if available).
Manually pause and redistribute mid-cycle if needed.
LG’s Recommendation: Never exceed the max load capacity (check the manual).
Inspect the Suspension Rods & Shock Absorbers
Faulty suspension components can lead to persistent UL errors.
How to Check:
- Unplug the washer and tilt it back carefully.
- Inspect the shock absorbers (should have resistance when pressed).
- Look for broken or worn suspension rods.
Solution: Replace damaged parts to restore balance.
Warning: If unsure, contact LG support or a professional technician.
Run a Drum Clean Cycle of LG HE Washer
Debris buildup can affect drum movement.
Steps to Clean:
- Select the “Tub Clean” cycle (or use hot water + vinegar).
- Wipe the drum edges to remove lint or residue.
- Run an empty rinse cycle afterward.
Why It Helps:
- Removes obstructions causing imbalance.
- Improves overall washer performance.
When to Call LG Support
If the UL error persists after trying all fixes:
Possible Causes:
- Faulty load sensor
- Damaged motor or bearings
- Control board malfunction
Next Steps:
✔ Contact LG Customer Service for diagnostics.
✔ Schedule a professional repair if needed.
Pro Tip: Check if your washer is under warranty before repairs.
Final Thoughts
The LG HE Washer UL Error is usually a quick fix by redistributing clothes or adjusting the load. Follow these 10 proven steps to keep your washer running smoothly.
Key Takeaways:
Balance heavy and light items in the drum.
Avoid overloading and use proper detergent.
Check washer leveling and suspension if the issue persists.
By following this guide, you’ll eliminate UL errors and extend your washer’s lifespan. Happy laundering!






